Extended Dual-Ball Mount

It's rated for 10,000, 16,000, or 21,000 pounds depending on which receiver size and ball you use. The 2 inch shank version covers the 10,000 and 16,000 pound ratings, and the 2.5 inch shank version covers the 21,000 pound rating. Tow capacity is always limited by the lowest rated component in your setup, so check your truck's receiver rating and trailer coupler rating alongside this mount's rating before loading to any of these figures.

No. GEN-Y designed this ball mount for a straight truck receiver only, not for use with a drop hitch. It has a fixed height and doesn't provide any drop or rise adjustment, so if your trailer coupler sits higher or lower than your receiver, use a drop hitch with its own ball mount slot instead of pairing this extended mount with one.

It includes both a 2 inch ball and a 2 5/16 inch ball on the same mount, so you get two ball sizes without buying them separately. That covers most common bumper pull trailer couplers. Match the ball to your specific trailer coupler size before towing, since using the wrong ball size for your coupler isn't rated by GEN-Y and can lead to an unsafe connection.

The 2 inch shank version measures 8.313 inches from the pin hole to the center of the ball, and the 2.5 inch shank version measures 8.75 inches from pin hole to ball center. Both versions run 12 inches long overall. That extended length gives more clearance between your trailer and tow vehicle than a standard-length ball mount, which helps on tighter turns or with low-mounted truck equipment.

It fits 2 inch and 2.5 inch truck receivers. The 2 inch shank comes in a 10,000 pound or 16,000 pound rating, and the 2.5 inch shank comes in a 21,000 pound rating. Confirm your truck's receiver opening size before ordering, since the shank size and the receiver size need to match for the mount to fit and tow at its rated capacity.

Yes. GEN-Y manufactures this ball mount in the United States from steel, finished in a zinc rich epoxy primer and durable powder coat. It weighs 20 pounds and is tested to exceed SAE J684 weight testing requirements. GEN-Y publishes USA Made compliance documentation on its site for buyers who want to confirm domestic manufacturing before ordering.

This ball mount is backed by GEN-Y's limited lifetime warranty, the same coverage GEN-Y applies across its ball mount and hitch lines. GEN-Y publishes the full warranty terms and manual on its site so you can review coverage details and the claims process before you need to use it.

This mount carries a 1,500 pound tongue weight rating across both shank versions. Tongue weight is the downward force your trailer coupler puts on the ball mount, and staying within this rating, along with the mount's towing capacity rating for your receiver size, keeps the mount operating within its tested limits.