GoosePuck 5" Offset Ball Puck System

The GEN-Y GoosePuck is a 2 5/16 inch offset gooseneck ball that bolts directly into your truck's existing OEM puck system in place of a factory ball. It's rated for up to 25,000 pounds of towing capacity and offers a 5 inch offset that adds turning clearance compared to a standard, non-offset gooseneck ball. It eliminates the need for a separate, bulky bed-mounted gooseneck hitch.

The GoosePuck is rated for up to 25,000 pounds of gooseneck towing capacity. It's fabricated from heavy duty steel and was a 2022 first place "Best New Product" winner at the NATDA Show. As with any towing setup, overall capacity is limited by the lowest-rated component, so confirm your truck's own gooseneck towing rating meets or exceeds what you plan to tow.

The GoosePuck is 100% compatible with OEM puck systems on Ford, Chevy, and Dodge trucks. If you own a GM truck, GEN-Y recommends checking your bed's puck measurements before ordering, since GM puck spacing can vary and may not match the GoosePuck's fitment in every case; confirming measurements first avoids ordering a ball that won't seat correctly in your factory puck holes.

The GoosePuck installs using your truck's existing factory OEM puck holes, no drilling or additional hardware needed beyond what's included. All 3 mounting bolts (3/8-16) need to be installed and torqued to 23 ft-lb. If the locking handles don't align properly during installation, slightly loosen the center nut to allow adjustment, position the handles correctly, then retighten the center nut securely.

The GoosePuck uses a 2 5/16 inch gooseneck ball, the standard size for most gooseneck trailer couplers. It offers a 5 inch offset from the puck mounting point, which increases clearance during sharp turns compared to a ball mounted directly over the puck, particularly useful on trucks with toolboxes or other bed accessories near the hitch area.

Yes. GEN-Y also offers the GoosePuck GEN 2, which builds on the original with rear puck integration for improved clearance around toolboxes, built-in safety chain attachment points, and enhanced adjustability. Both versions use a 2 5/16 inch ball and are rated up to 25,000 pounds, but the GEN 2 is a separate product with its own fitment options for Ford, Ram, and GM trucks.

The GoosePuck (part number GH-21005) weighs 40 pounds. As a compact puck-mounted ball rather than a full bed-mounted hitch, it's significantly lighter and easier to install than a traditional gooseneck hitch assembly, since it replaces only the ball itself rather than an entire rail or under-bed frame system.

Yes. The GoosePuck is manufactured in the United States from heavy duty steel. It's protected under patent number 11,585,302 and backed by GEN-Y's limited lifetime warranty. Confirm current warranty terms on GEN-Y's warranty page, since coverage details are updated periodically and may differ slightly from what's stated in older product literature.